Image of Grieve Modified Electrically-Heated Truck Oven, Unused
Grieve Modified Electrically-Heated Truck Oven, Unused image 0Grieve Modified Electrically-Heated Truck Oven, Unused image 1Grieve Modified Electrically-Heated Truck Oven, Unused image 2Grieve Modified Electrically-Heated Truck Oven, Unused image 3Grieve Modified Electrically-Heated Truck Oven, Unused image 4Grieve Modified Electrically-Heated Truck Oven, Unused image 5

Grieve Modified Electrically-Heated Truck Oven, Unused

The Grieve Modified Electrically-Heated Truck Oven is designed for baking, drying, preheating or any other application where a dependable source of heated air at 500°F is required.


Product Code: A22422

Manufacturer: The Grieve Corporation

Model:

Serial: N/A

Location: Available upon request

Request a QuoteSell Similar



  • Product Details
  • Capabilities

The Grieve Modified Electrically-Heated Truck Oven offers short preheat and process times due to its Incoloy sheathed tubular heating elements. The heating element terminals extend through the oven wall so that no wiring is exposed to oven temperatures. The Grieve Modified Truck Oven has two single, side hinged doors at the front of the oven and the heat chamber is located at the rear for easy maintenance.

 


Includes (2) stainless steel loading trucks

Temperature:

Normal operating temperature: 200°F

Maximum continuous operating temperature: 500°F

Heat Input:

80 kW heat input capacity installed in Incoloy sheathed tubular heating elements with terminals passing through pipe ports welded at inside of oven and sealed at the outside with compression fittings

Rear mounted heat chamber separated from the workspace by baffles which prevent transfer of heat to work by direct radiation

Recirculating Blower:

10,000 cfm heavy duty, high pressure stainless steel recirculating blower direct driven by a 7½HP electric motor

Silicone rubber shaft seal

Arranged for full horizontal air flow from sides to a center return duct

Construction:

Interior fabricated of 16 gauge, 2B finish, 304 stainless steel and structurally reinforced

All interior seams and corners back-welded continuously on the insulation side

6" of non-settling industrial rockwool insulation throughout walls, doors and ceiling

6" thick insulated, reinforced floor with 16 gauge, 304 stainless steel cover

Dimensions/Weight:

Approximate overall dimensions:

100" wide (plus 15" control panel overhang at the right side of the oven)

110" deep (plus 26" motor mount overhang at rear

84" high (plus 24" exhaust on top

Estimated weight: 8,000lbs


Association of Machinery and Equipment Appraisers
Machinery Dealers National Association
Mass Bio
NAA Auctioneers